BMW 2011 135i Coupe Manual De Propietario

t a

lanc

riv

g tip

ilit

Confirmation signals

You can activate or deactivate the confirmation
signals.
For operating principle refer to page

Switch on the ignition, refer to page

Briefly press button

1 in the turn signal/high

beam lever up or down repeatedly until the
symbol appears in the display, accompa-
nied by the word "SET".

Press button

Briefly press button

1 in the turn signal/high

beam lever down repeatedly until the
desired symbol appears in the display.

Confirmation signal during unlocking

Confirmation signal during locking

Press button

Use button

1 to select:

The hazard warning flashers light up
during unlocking/locking.

The function is deactivated.

Press button

The setting is stored.

Malfunctions

The remote control may malfunction due to
local radio waves. If this occurs, unlock and lock
the car at the door lock with the integrated key.
Coupe: in vehicles without an alarm system

Comfort Access

, only the driver's door can be

unlocked and locked using the integrated key in
the door lock.
If the car can no longer be locked with a remote
control, the battery in the remote control is dis-
charged. Use the remote control on an
extended trip to recharge the battery, refer to
page

. The remote control for Comfort

Access contains a battery that may have to be
changed, refer to page

For US owners only

The transmitter and receiver units comply with
part 15 of the FCC/Federal Communications
Commission regulations. Operation is gov-
erned by the following:
FCC ID:
LX8766S
LX8766E
LX8CAS
Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:

This device must not cause harmful inter-
ference, and

this device must accept any interference
received, including interference that may
cause undesired operation.

Any unauthorized modifications or
changes to these devices could void the

user's authority to operate this equipment.