BMW 2010 X5 xDrive35d Manual De Propietario
![BMW](https://files.manualsbrain.com/attachments/59bff3c21d02c686320f922a23b4f0fd8e167e8d/common/fit/150/50/d22aabf2d062b824edd261b72ebf0e854c720c7e6ff4ab10933d93100f3a/brand_logo.png)
87
>
Show the path of the smallest turning circle
on a flat road surface.
on a flat road surface.
>
When the steering wheel is turned, only one
turning line is displayed.
turning line is displayed.
To display parking aid lines using iDrive, refer to
page
page
Parking using pathway and turning
lines
1.
Position the vehicle so that the turning lines
lead into the margins of the parking space.
lead into the margins of the parking space.
2.
Turn the steering wheel so that the pathway
lines coincide with the corresponding turn-
ing line.
lines coincide with the corresponding turn-
ing line.
Obstacle marking
>
Three-dimensionally shaped markings can
be displayed in the image of the rear view
camera.
be displayed in the image of the rear view
camera.
Their color gradation corresponds to the mark-
ings in PDC. This helps estimate the distance to
the object pictured.
To display obstacle marking using iDrive, refer
to page
ings in PDC. This helps estimate the distance to
the object pictured.
To display obstacle marking using iDrive, refer
to page
Activating assistance functions
Several assistance functions can be active at
the same time.
the same time.
Displaying parking aid lines
1.
Select the "Parking aid lines" symbol.
2.
Press the controller.
Pathway and turning lines are displayed.
Displaying obstacle marking
1.
Select the "Display obstacle marking"
symbol.
2.
Press the controller.
Three-dimensionally-shaped markings are dis-
played.
played.
Image on the Control Display
Switching on the rear view camera
using iDrive
using iDrive
With PDC activated:
1.
Select the "Switch on rear view camera"
symbol.
2.
Press the controller.
The image of the rear view camera is displayed.
The setting is stored for the remote control cur-
rently in use.
The setting is stored for the remote control cur-
rently in use.
Brightness
With the rear view camera switched on:
1.
Select the
symbol.
2.
Turn the controller until the desired setting
is displayed and then press the controller.
is displayed and then press the controller.
ba8_e70ag.book Seite 87 Freitag, 5. Juni 2009 11:42 11
Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG