BMW 2009 X6 xDrive50i Manual De Propietario
87
Speed limit
You can enter a speed and a Check Control
message indicates when you have reached this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
message indicates when you have reached this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
Displaying, setting or changing limit
iDrive, for operating principle refer to page
1.
Open the start menu.
2.
Open "Navigation".
Without navigation system
Without navigation system
*
:
Open "Car Data".
3.
Select "Car Data" and press the controller.
4.
Select "Limit" and press the controller.
5.
Select the speed value and press the con-
troller.
troller.
6.
Turn the controller to set the limit.
7.
Press the controller to apply the setting.
The limit is automatically activated.
The limit is automatically activated.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system applies your current
speed as the limit.
controller. The system applies your current
speed as the limit.
Activating limit
Select "On" and press the controller.
Limit is automatically activated.
Stopwatch
iDrive, for operating principle refer to page
.
1.
Open the start menu.
2.
Open "Navigation".
Without navigation system
Without navigation system
*
:
Open "Car Data".
3.
Select "Car Data" and press the controller.
4.
Select "Stopwatch" and press the control-
ler.
ler.
Starting, stopping or resetting
>
Select "Start" and press the controller.
The stopwatch starts at the displayed time.
The stopwatch starts at the displayed time.
>
Select "Reset" and press the controller.
The stopwatch is reset and it restarts if it
was running beforehand.
The stopwatch is reset and it restarts if it
was running beforehand.
>
Select "Stop" and press the controller.
This stops the timer.
This stops the timer.
Taking an intermediate time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
The interim time appears below the ongoing
primary stopwatch count.
All of the remaining functions remain
available at all times while the stopwatch
available at all times while the stopwatch
is running. The stopwatch continues operation
in the background.
in the background.
<
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG