BMW 2005 760Li Sedan Manual De Propietario

Cont

Refe

t a gl

anc

g t

uni

viga

Ent

inm

time.
The brake lamps come on.
The vehicle continues to brake automati-
cally for as long as you maintain pressure
on the button.

When you brake the vehicle to a vir-
tual stop, i.e., down to a speed of

approximately 2 mph/3 km/h or below, the
parking brake remains engaged.
The indicator lamp

in the Info Display

lights up red. Briefly press the button to
disengage the parking brake manually.

Automatic Hold

You can activate this feature after starting
the engine; it then remains operational until
the next time the engine is switched off.

This feature provides supplementary sup-
port during vehicle operation by automati-
cally engaging and releasing the parking
brake during stops at traffic lights, in stop-
and-go traffic, etc. As the vehicle then no
longer tends to creep when the transmis-
sion is engaged, it is no longer necessary to
hold the vehicle by pressing the brake
pedal.

It prevents the vehicle from rolling back-
ward during uphill starts.
The parking brake engages automatically
when you stop the vehicle and switch off
the engine.

You can activate or cancel the Automatic
Hold feature by selecting the "Settings"
menu in the Control Center. A description
of the Control Center is provided on
page

Automatic Hold activation/
deactivation

Select "Settings"

Select

and confirm

Select "AUTO P". Press the controller
to activate/deactivate the desired func-
tion

Automatic Hold is activated.
The green AUTO P status message in
the Info Display shows you that the sys-
tem is ready for operation

Automatic Hold is deactivated.
The green AUTO P status message dis-
appears from the Info Display.

You can assign the Automatic Hold
function to the programmable button

on the steering wheel, refer to page

This feature then provides you with quick
access to the Automatic Hold function,
allowing you to control it without undue dis-
traction from road and traffic conditions.

You can also deactivate Auto-
matic Hold by pressing the but-
ton while the vehicle is station-
ary. The vehicle remains
stationary, the indicator lamp

changes from green to red. Press the but-
ton again to release the parking brake.

Driving with Automatic Hold

The parking brake engages automatically
when the vehicle comes to a stop. The indi-
cator lamp

in the Info Display lights

up green.

To start off again, simply press the acceler-
ator pedal. The parking brake is released
automatically; the indicator lamp

goes out.

Do not drive through an automatic car
wash with the Automatic Hold on and

the engine running. The system would
engage the parking brake while the vehicle
is stationary.

Parking with Automatic Hold

The parking brake engages automatically
when you stop the vehicle and switch off
the engine. The indicator lamp

changes from green to red.