BMW 2004 X5 3.0i SAV Manual De Propietario

112

Integrated universal remote control

1. Park your vehicle within the range of

the remote-controlled device

2. Program the integrated universal

remote control as described at the
section on fixed-code hand-held
transmitters

3. Localize the button on the receiver of

the device you want to set up, e.g.
on the upper section of the motor

4. Press the button on the receiver of

the device you want to set up. After
step 4, you have approx. 30 seconds
for step 5

5. Press the programmed memory

button 1 on the integrated universal
remote control three times.

The corresponding memory button 1 is
now programmed with the signal of the
original hand-held transmitter.

If you have any additional ques-
tions, please contact your BMW

Sports Activity Vehicle center.

Clearing memory buttons

Individual memory buttons 1 cannot be
cleared. However, you clear all three
memory buttons 1 together as follows:

Press both outer buttons 1 of the inte-
grated universal remote control for
approx. 20 seconds, maintaining pres-
sure until the indicator lamp 2 starts to
flash.

User information

Do not use this integrated universal
remote control with any garage door
opener that lacks safety – stop – and –
reverse – features as required by fed-
eral safety standards, this includes any
garage door opener model manufac-
tured before April 1st, 1982.

This device complies with Section 15 of
the FCC Rules. Operation is subject to
the following two conditions: as defined
in the regulations, this device must not
emit harmful interference, and must be
shielded against interference from
external sources to prevent unautho-
rized or inadvertent activation.