BMW i8 Información De Garantía

Descargar
Página de 38
Maintenance Service Summary
The Condition Based Service (CBS) system will
determine the requirement for performing the
maintenance services described in this section,
ending on page 7. These services may be
required either individually or in conjunction with
other maintenance services.
Maintenance services are performed as outlined
in this section, based on intervals of either time,
mileage or after performing a specified number
of previous services. These intervals correspond
to the latest information available when this
Booklet was printed. Maintenance intervals are
subject to change with newer vehicles or may
also apply retroactively. Your authorized BMW
center will be able to advise and perform
maintenance services as required by the most
recent information that applies to your vehicle.
Standard operations
Maintenance work:
䉯 Verify Check Control messages.
䉯 Check indicator and warning lights.
䉯 Reset CBS display.
䉯 Inspect tires, adjust tire pressures and reset
Tire Pressure Monitor.
䉯 Check parking brake functionality while the
vehicle is being driven into the workshop.
䉯 Check thickness of all brake pads using
special tool (pertains only to vehicles of 5/14
production).
HV battery:
䉯 Check and record the customer’s charge
setting in the central display.
䉯 Charge the HV battery.
Engine oil
Maintenance work:
䉯 Change the engine oil and oil filter (as shown
in CBS). We recommend BMW High
Performance 5W-30 Synthetic Oil
P/N 07 51 0 017 866.
Maintenance services connected to a
specific engine oil service*
*These additional connected services will not be
shown in the vehicle’s CBS display.
Maintenance work:
䉯 After every 2nd Engine Oil Service: Ventilation
microfilter: replace ventilation microfilter.
䉯 Check tightness of door hinge bolts.
䉯 After every 4th Engine Oil Service: Intake air
cleaner: replace air filter element (reduce
replacement interval in dusty operating
conditions).
䉯 Replace door support struts.
Maintenance services that display in
CBS
Front brakes (as of 7/14 vehicle
production)
Maintenance work:
䉯 Replace brake pads, clean brake pad contact
points in calipers.
䉯 Brake discs: Check surface and thickness,
replace as necessary.
Rear brakes (as of 7/14 vehicle
production)
Maintenance work:
䉯 Replace brake pads, clean brake pad contact
points in calipers.
䉯 Brake discs: Check surface and thickness,
replace as necessary.
䉯 Parking brake: Repair or replace parking brake
shoes/linings only if a reduction in the brake’s
effectiveness is noted. When fitted, parking
brake shoes/linings are excluded from
coverage under the BMW Maintenance
Program.
6