Black Box Network Hardware EncrypTight Enforcement Point (ETEP) Manual De Usuario
Installation
38
ETEP Installation Guide
Figure 23
ET0100A Cabling
Powering on the ET0100A
Use the following procedure to power up the ET0100A.
To power on the ET0100A:
●
On the appliance’s rear panel, plug the power cord into the ET0100A power receptacle. Attach the
opposite end to a power source to apply power to the appliance.
opposite end to a power source to apply power to the appliance.
Due to the shielding in the power cable, you must exert significant pressure to properly insert the power
cord into the ET0100A power receptacle. A properly seated power cord cannot be moved within the
receptacle (
cord into the ET0100A power receptacle. A properly seated power cord cannot be moved within the
receptacle (
). Wiggling or jostling an improperly seated power cord may cause the appliance to
reboot (
).
Figure 24
Properly seated ET0100A power cable