B&B Electronics PCMCIA 232PCC2 Manual De Usuario

 

Documentation Number 232PCC23799 Manual 

15 

 

 
 

To allow easy configuration of the 232PCC2, a Windows 

95/98 “INF”configuration file has been written for the hardware.  This 
configuration file supports the 232PCC2 in both addressing modes: 
block mode and COM mode. 
 

1.  Insert the 232PCC2 into any available PC Card socket. 

2.  The first time a new PC Card type is installed, either the 

New Hardware Found window or the Update Device 
Driver Wizard window is displayed. After the initial 
installation, Windows 95/98 will automatically detect and 
configure the card.  If the neither window is displayed, skip 
to the section "232PCC2 Resource Settings".  

3.  If your version of Windows displays the New Hardware 

Found window select the 

 option button 

and click 

 to continue.  An Install from Disk dialog box 

should open.  Insert the 232PCC2 disk, select the correct 
drive letter (generally A:), and click the 

 button.  Windows 

95/98 automatically browses the root directory for an INF file 
that defines configurations for the new hardware, as well as 
the required files.  

4.  If your version of Windows displays the Update Device 

Driver Wizard window, insert the 232PCC2 disk into the A: 
or B: drive and click Next.  Windows 95/98 automatically 
browses the root directory of A: and B: for an INF file that 
defines configurations for the new hardware, as well as the 
required files.  Windows 95/98 will report that is has found 
the driver for the device, click Finish to complete the 
installation. 

During the installation process, it may be required to supply 

the computer with the Windows 95/98 CD or installation 
diskettes.  The 232PCC2's serial devices will require the file 
"SERIALUI.DLL".  Insert the CD or diskette and click “OK".