Bushnell ImageView 118200 (No USB Mass Storage) Manual De Usuario

QUICK GUIDE

Holding the ImageView as steadily as possible with both hands wrapped around the

binocular, lightly press down the SNAP button using the flat end of a finger. Leaning

against a wall, tree, etc. to brace yourself can also help insure the camera does not move

as you take the photo. Make sure you are at least 30 feet or more away from your photo

subject. Unlike the binocular optics (which will focus down to about 15 ft.), the camera focus is preset

and is designed only for distant subjects- your photos may look out of focus if you were too close.

USING THE IMAGEVIEW WITH YOUR COMPUTER

BEFORE CONNECTING THE IMAGEVIEW TO A COMPUTER, first install the driver from the

CONNECTING THE IMAGEVIEW TO A COMPUTER, first install the driver from the

CD-ROM as directed in “Software Installation”. After the driver has been installed, you may install

Roxio® PhotoSuite 5 as well, following the on-screen instructions (if you do not already have photo

PhotoSuite 5 as well, following the on-screen instructions (if you do not already have photo

software you prefer to use). Connect the supplied USB cable between the ImageView and your computer,

using a USB port on the computer itself (avoid USB “hubs”). Please read “Downloading Photos to Your

Computer” for detailed instructions on transferring photos to a PC using PhotoSuite.