Brocade Communications Systems Brocade MLX Series and Brocade Netlron XMR 53-1002373-02 Manual De Usuario
182
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide53-1002373-02
Installing a Brocade MLX-16 router
3
This message is displayed at bootup, or when the NI-MLX-1Gx48-T-A module is inserted in the
router.
router.
When installing NI-MLX-1Gx48-T-A modules, you must upgrade the software on all installed
interface modules and management modules to the appropriate software release. For more
information refer to the Multi-Service IronWare Software Release 05.2.00 for Brocade MLX Series
and Brocade NetIron Family. For more information on upgrading the software, refer to the
Multi-Service IronWare Software Upgrade Guide.
interface modules and management modules to the appropriate software release. For more
information refer to the Multi-Service IronWare Software Release 05.2.00 for Brocade MLX Series
and Brocade NetIron Family. For more information on upgrading the software, refer to the
Multi-Service IronWare Software Upgrade Guide.
Installing NIBI-16-FAN-EXH-A fan assemblies
NOTE
You can remove and replace fan assemblies and switch fabric modules while the Brocade MLX
16-slot router is powered on and running.
You can remove and replace fan assemblies and switch fabric modules while the Brocade MLX
16-slot router is powered on and running.
CAUTION
To avoid overheating of the router, remove one fan assembly at a time, and replace it promptly.
Do not remove all fans from the device at once.
Do not remove all fans from the device at once.
To install the high speed fans, you need the following:
•
Two high-speed fan assemblies, as shown in
.
•
A small flat-blade screwdriver.
•
An ESD wrist strap with a plug for connection to the ESD connector on the router chassis.
DANGER
For safety reasons, the ESD wrist strap should contain a 1 megohm series resistor.
FIGURE 128 High-speed fan assemblies for Brocade MLX 16-slot routers
Perform these steps to replace standard rear fan assemblies with high-speed rear fan assemblies
in a 16-slot router.
in a 16-slot router.