Brocade Communications Systems Brocade MLX Series and Brocade Netlron XMR 53-1002373-02 Manual De Usuario

Installing a Brocade NetIron XMR 32000 router

4

FIGURE 203 Routing lower-right quadrant cables

2. Route cables from slots #30 and #29 down through comb A. Refer to 

.

3. Route cables from slots #28 and #27 down through comb B.

4. Route cables from slots #26 and #25 down through comb C.

Accessing modules for service

With the cables bundled correctly, it is easier to access the modules for service. Gently move the 
cable bundles to the side to access a module. Use the appropriate Phillips or flat-blade screwdriver 
with an extended shaft to disconnect the cables from the module and remove the module. There is 
no need to undo the cable cinches or cable ties. Refer to 

NOTE

This procedure is easier with two people. One person can hold the cable bundles aside while the 
other person loosens the connectors and removes the module.

1

Lower right quadrant

3

Comb B (slots #27 and #28 cables)

2

Comb A (slots #29 and #30 cables)

4

Comb C (slots #25 and #26 cables)