Brocade Communications Systems CNA, HBA 415 Manual De Usuario
Brocade Adapters Administrator’s Guide
127
53-1001256-01
Remote Port Properties panel (HBA and CNA)
A
Remote Port Properties panel (HBA and CNA)
The Remote Port Properties panel enables you to display the properties that are associated with
the remote port.
the remote port.
Opening the properties panel
1. From the device tree, select a remote port (target or initiator).
2. Click the Remote Port Properties tab in the right pane.
NOTE
If it is a target port, there are two tabs in the right pane: Properties and LUNs.
Fields and components
Field
Description
Fibre Channel Properties
Port WWN
The world wide name of the device’s port.
Node WWN
The world wide name of the device.
Symbolic Name
The symbolic name associated with the remote port.
Name
The name associated with the device.
Role
The role of the device (target or initiator).
Target Rate Limiting Enforced
The status of traffic rate limiting, either on or off.
QoS Priority
The traffic priority (high, medium, or low) for a given source and
destination traffic flow, assigned by the Fabric operating system
(FOS). By default, all flows are marked as medium.
destination traffic flow, assigned by the Fabric operating system
(FOS). By default, all flows are marked as medium.
Bus #
The unique identifying number for each PCI bus, assigned during
system initialization.
system initialization.
Target ID
The identifier of the target device.