Britax BB0-651 Prospecto

 You must check 

that the headrest is in the correct 
position for your child before each 
journey.
With the seat supported, squeeze 
the headrest adjuster at the back of 
the headrest (dia 1a).

Move the headrest up or down so 
that the head is positioned centrally 
as in the picture (dia 1b).
When the headrest is in the correct 
position let go of the headrest 
adjuster and ensure it has locked 
into place.

To adjust the backrest, place one 
hand on the seat section and push 
firmly on the backrest until you 
feel and hear a click (dia 1c). The 
backrest will now pivot freely and 
does not need to click into another 
position.

Push the child seat back until it is 
touching the car’s seat back (dia 1d). 
The cars seat backrest can be moved 
to a desired angle.

 The backrest of 

the child seat MUST always be in 
contact with the cars seat back AND 
the base section of the child seat 
MUST always be in contact with the 
car’s seat base.

If one or both sections of the child 
seat are not in contact with both 
sections of the car’s seat you MUST 
angle the car seat more upright 
(dia 1e).

 Have you adjusted 

the headrest to the correct position 
for your child and ensured that the 
seat has an appropriate recline angle?

 You MUST NOT use 

the child seat for a child weighing 
more than 36kg.
Place the child seat forward facing in 
your car, ensuring it is pushed firmly 
into the car seat. Feed the diagonal 
section of the seat belt through the 
dark red upper belt guide on the 
OPPOSITE side to the buckle (dia 2a).

 When installing 

the child seat, the vehicle seat 
must be kept in a normal upright 
position at all times. Reclining the 
vehicle seat will adversely affect the 
performance of the seat in a crash.
Fasten the seat belt across your child. 
The lap section of the seat belt should 
rest on the red lower belt guides on 
each side of the child seat (dia 2b). 

The lap section of 

the seat belt should rest as forward 
and as low as possible over your 
child’s pelvis.
Remove as much slack as possible 
from the seat belt and make sure it 
is fitted comfortably, but tightly and 
is not twisted (dia 2c).

 You must use the 

upper belt guide at all times.

 Ensure that the 

diagonal section of the belt lays over 
the shoulder of the child and NOT 
against the neck.
Tighten the seat belt by pulling the 
diagonal section in the direction of 
the arrow   (dia 2d).
If your vehicle has an adjustable seat 
belt upper anchorage, adjust its 
height so that the seat belt passes 

through the centre of the upper belt 
guide on the child seat and pull the 
seat belt to tighten  .

 The child seat must 

not be installed in a position where 
the seat belt anchorage point is level 
with, or forward of, the upper belt 
guide (dia 2e).

 Once you have installed the child seat it is 

important that you check the position of the seat belt buckle 
to ensure a secure installation. 
If the seat belt buckle looks like this then the seat belt buckle 
position is correct (dia 2f).

If the seat belt buckle looks like this, where the buckle is being 
pulled around the shell into the red lower belt guide (dia 2g), 
try another seating position in the car.

 Do not leave your child seat loose. Always 

fasten the seat belt across the child seat when it is not being 
used by your child to prevent the seat being hurled forward in 
the event of an accident. 

If the seat belt does not lie within the red lower belt guides 
then the seat is not properly installed (dia 2h).
If you are in any doubt contact Customer Services on  
01264 386034. 
To release your child simply undo the seat belt.

Removing the cover
Unhook the elastics which hold the main cover section in place 
(dia 3a). The red spots show their location.

Unhook the elastic from the 
hook at the front of the seat 
(dia 3b).

Unhook the elastics which hold the headrest cover section in 
place (dia 3c). The red spots show their location. The edges 
of the headrest cover section can now be pulled away from 
the seat.

Unhook the elastics from the 
hooks on the underside of the 
seat (dia 3c).

This child seat MUST only be used with a lap and diagonal seat belt (approved to UN/ECE regulation no. 16 or equivalent standards).