Bradford-White Corp TTW ECO DEFENDER U4TW40T*FRN Manual De Usuario

 Page 31 

Step 11.  

Secure blower in place using mounting screws from step 7.

Step 12.  

Reinstall exhaust adapter from step 4. 

Step 13.  

Reinstall dilution air clip from step 5. 

Step 14. 

Reconnect vent system to exhaust adapter. 

Step 15.  

Reconnect cords from step 6. 

Step 16. 

Position gas control power switch to the “ON” position. 

Step 17. 

Verify proper blower operation.  

Step 1. 

Move the gas control power switch to the 

“OFF” position.

Step 2.  

Remove  the  three  screws  (Phillips  screw 

driver) from control access cover on blower and remove 

cover.

Step 3. 

Locate the blower temperature switch.  

Gas control power 

switch 

Control access 

cover

Blower temperature 

switch location

Air mixing

inlet

115 volt potential exposure. Use caution making voltage checks to avoid 

personal injury.

31