Bostitch Air Compressor CAP60P-OF Manual De Usuario

Unit will not run

Tank pressure exceeds “cut in” pressure

Once pressure drops below “cut in” pressure, the unit will start.

Extension cord causing excessive amp draw

Check guidelines for proper cord gauge 

(use of extension cords is not recommended).

Fuse or circuit tripped

Replace fuse or reset breaker

Unit not turned on or not plugged in

Check pressure switch and verify that it is in the On position.  

V

erify that unit is plugged in.

Cold weather conditions

Place compressor in warmer environment for at least 30 minutes

(typically temperatures below freezing)

then try restarting.

Air leaks at fittings

Fittings loose

Tighten fitting.  Check with soapy water

.  DO NOT OVER TIGHTEN.

Air leak at pressure switch

Clogged check valve

Remove and clean check valve

Unit will not build pressure

Application requires excessive air demand

Reduce demand on compressor

Loose head

Tighten bolts on head

Blown gasket

Remove head and check for 

broken or deformed gasket. Replace if needed.

Unit will not build pressure

W

orn or broken valves

Remove head and replace valves.

Air leak at tank or air tank

Damaged air tank

welds.

10