BlueAnt Supertooth 2 Bluetooth portable handsfree Manual De Usuario
NOKIA 6255/6230/6820/6650/6310/6310i
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1.
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1.
Press Menu and select Settings, Connectivity and Bluetooth. (For 6310 Press Menu
and select Bluetooth)
and select Bluetooth)
2. Select
Blue tooth
on
and On.
3. Continue
pressing
Back then finally Exit.
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)
1.
1.
Bring the cellular phone at about 20 cm from the Handsfree Kit.
2.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
position. The Bluetooth Indicator will glow (blue blink).
3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
Press Menu and select Settings, Connectivity and Bluetooth.
5. Select Search for audio enhancements.
The phone now searches for Bluetooth devices to be paired. When the search is
complete, it displays the names of the devices found.
complete, it displays the names of the devices found.
6.
Choose the device you want to pair with your phone, Select.
7.
Enter “0000” as the passcode then press ok.
8. Continue
pressing Back then finally Exit.
The Handsfree Kit is paired and ready to use. An icon will be displayed during the standby
mode indicating that the Handsfree Kit is linked with the phone.
•
mode indicating that the Handsfree Kit is linked with the phone.
•
Once paired, keypad tones can be heard on the Handsfree Kit.
•
Pairing is done only once. When the Handsfree Kit is turned off, then turned back on, it
automatically connects to the cell phone. That is, when you have already activated the
cell phone’s Auto Accept Mode. (Kindly refer to “section c. AUTO ACCEPT MODE”).
automatically connects to the cell phone. That is, when you have already activated the
cell phone’s Auto Accept Mode. (Kindly refer to “section c. AUTO ACCEPT MODE”).
•
When the paired device is deleted, it can still be viewed as an active device and not yet
completely disconnected. Thus, there will still be simultaneous connection between your
Handsfree Kit and cell phone even after deleting was done. But when you delete the
pairing and at the same time, turn off your Handsfree Kit, you automatically disconnect
the bond.
completely disconnected. Thus, there will still be simultaneous connection between your
Handsfree Kit and cell phone even after deleting was done. But when you delete the
pairing and at the same time, turn off your Handsfree Kit, you automatically disconnect
the bond.
•
When the paired device was deleted and the Handsfree Kit was turned off, no need to
undergo the same pairing procedure. When you turn back on the Handsfree Kit, the
phone displays a question, “Pair with?…” Press Accept, enter “0000” as the passcode
and press ok.
undergo the same pairing procedure. When you turn back on the Handsfree Kit, the
phone displays a question, “Pair with?…” Press Accept, enter “0000” as the passcode
and press ok.
c. AUTO
ACCEPT
MODE
The auto accept mode allows the Bluetooth function to be turned on automatically whenever
the user starts sending information such as answering or making a call via the Handsfree Kit.
1. Press
the user starts sending information such as answering or making a call via the Handsfree Kit.
1. Press
Menu and select Settings, Connectivity and Bluetooth.
2. Select
Paired devices. Choose Supertooth and press Options.
3. Select
Request conn. authorisation.
4. Select
No.
5. Continue
pressing
Back then finally Exit.
33