Blaupunkt NEW YORK 800 Manual De Usuario

7

Enter broadcast frequency directly
If the frequency of the desired stations is known, it can 
be entered directly via the touchscreen.

 

쏅 In radio mode, press the [   ] button.

A numeric keypad is displayed for the frequency 
input.

 

쏅 Enter the frequency of the desired station with the 

numeric keypad. 

 

쏅 Press the [ 

 ] button.

The radio menu is displayed, the station of the 
frequency entered is played back. 

 

쏅 Press the [   ] or [   ] button for approx. 2 seconds 

to start station seek tuning.

The radio tunes into the next receivable station.

Note:
For the reception area Europe: In the FM waveband, 
only traffi

  c information stations are tuned into if the 

priority for traffi

  c information is switched on. 

 

쏅 Select the desired memory bank with the [   ] but-

ton.

 

쏅 Set the desired station.

 

쏅 Press the [ 

 ] button.

The menu for storing stations is displayed. 6 memory 
locations are available that are displayed as buttons. 

 

쏅 Press the button under which you want to store the 

current station.

The station is stored, the radio menu is displayed 
again.

With Travelstore, you can automatically search for and 
store the 6 FM stations off ering the strongest reception 
in the region in the memory bank FM1, FM2 or FM3.

 

쏅 Select an FM memory bank.

 

쏅 In the radio menu, press the [   ] button.

 

쏅 In the options menu, press the Travelstore button.

The tuner starts the automatic station seek tuning. 
After the storing is completed, the radio plays the 
station at memory location 1 of the previously se-
lected memory bank.

Note:
With switched-on priority for traffi

  c information, only 

traffi

  c information stations are stored.

Many FM stations broadcast an RDS (Radio Data System) 
signal in addition to their programme in the reception 
area Europe that allows additional functions, such as the 
display of the station name.

 

쏅 In the radio menu, press the [   ] button.

 

쏅 The options menu is displayed, the current setting is 

shown after RDS. 

 

쏅 In the options menu, press the RDS button to change 

the setting.

 

쏅 Press the [   ] button.

The radio menu is displayed again.

In the reception region Europe, an FM station can iden-
tify traffi

    c announcements via an RDS signal. If priority for 

traffi

  c reports is switched on, a traffi

  c report is automati-

cally switched through, even if the car sound system is 
currently not in radio mode.

Note:
The volume is increased for the duration of the 
switched-through traffi

  c announcement. You can ad-

just the minimum volume for traffi

  c announcements.

 

쏅 In the radio menu, press the TA button to switch the 

priority for traffi

  c announcements on or off .

The TA button is lit if the priority for traffi

  c announce-

ments is switched on.

 

쏅 In the radio menu, press the [   ] button.

 

쏅 In the options menu, press the TA VOL button.

 

쏅 Adjust the desired volume with the [   ] or [   ] but-

ton.

 

쏅 Press the [   ] button. 

The radio menu is displayed again, the set volume 
is stored.