Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Benq
  4. Projector Accessories MX716
  5. Manual De Usuario

Benq Projector Accessories MX716 Manual De Usuario

Descargar
Página de 66
Operation
36
Controlling the projector through a LAN 
environment
You can manage and control the projector from one or more remote computers when 
they are properly connected to the same local area network.
Cable connection
If you are in a DHCP environment:
1.
Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector 
and the other end to the RJ45 port on your Ethernet or router.
2.
Do one of the following: 
•
Press NETWORK SETTING on the remote control. The Network 
Settings page is displayed.
•
Press MENU/EXIT and then press  /  until the SYSTEM SETUP: 
Advanced menu is highlighted. Press   to highlight Network Settings and 
press ENTER. The Network Settings page is displayed. 
3.
Highlight Wired LAN and press ENTER.
4.
Make sure the Status is Connect.
5.
Press  
to 
highlight 
DHCP and press  /  to select On. 
6.
Press  
to 
highlight 
Apply and press ENTER.
7.
Re-enter the Network Settings > Wired LAN page. The IP Address, Subnet 
Mask, Default Gateway, and DNS settings will be displayed. Note down the IP 
address displayed in the IP Address row.
If the IP Address still does not appear, contact your ITS administrator.
If you are in a non-DHCP environment:
1.
Repeat steps 1-4 above.
2.
Press  
to 
highlight 
DHCP and press  /  to select Off.
3.
Contact your ITS administrator for information on the IP Address, Subnet Mask, 
Default Gateway, and DNS settings.
4.
Press   to select the item you want to modify and press ENTER.
MX717
MX716