Black & Decker F210 Manual De Instrucciónes

How to Use

This appliance is intended for household use only.
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of the

iron.

• Please go to www.prodprotect.com/applica to register your warranty.
Note: Use ordinary tap water for ironing. Do not use water processed through

a home softening system.
Important: For optimum performance, let the iron stand for 90 seconds

before beginning to iron.
FILLING WATER TANK

. Tilt the iron and using a clean measuring cup, pour water

into opening until the water reaches the MAX level mark on

the water tank (A). Do not overfill. Refill as needed.

. Plug in the iron. Temperature ready light glows when iron

has reached set temperature setting.

Tip: If unsure of a garment’s fiber, test a small area (on an

inside seam or hem) before ironing.

STEAM IRONING

. Move the dry/steam selector to the desired steam level (B).

. Turn the fabric select dial to appropriate setting (between

 and 6) for your fabric (C). See fabric guide on the heel

rest and read garment’s label to help you determine fabric

type. The temperature ready light glows until it reaches the

appropriate temperature. It then cycles on and off during

ironing.

. When finished ironing, turn the fabric select dial to lowest

heat setting, move the selector to

and unplug the iron.

Stand the iron on its heel rest and allow it to cool off.

Important: Always stand the iron on its heel rest when powered on but not

in use.

Product may vary slightly from what is illustrated.

ENGLISH

  1.  Spray nozzle
  2.  Water-fill opening
  3.  Dry/steam selector
  4.  Spray button
  5.  Temperature ready light
  6.  360° pivoting cord
  7.  Fabric guide
  8.  Heel rest
  9.  Water tank
10.  Fabric select dial
11.  Nonstick soleplate

Dry

Steam

Spray

Symbols





















