Black Box Network Hardware 8-/16-/24-Port 10/100 PoE PSE Web Smart Switch Manual De Usuario
Chapter 6: IP Address Assignment
724-746-5500 l www.blackbox.com
31
Figure 4-19. Per Port Counter screen.
4.6 QoS Setting
4.6.1 Priority Mode
4.6.1 Priority Mode
Function name: Priority Mode
Function description: This is the page that allows you to configure QoS (Quality of Service) to enhance network
performance. This switch supports three types of QoS.
Parameter description: Mode: There are three Priority Modes to select.
First-In-First-Service: The first receiving packet will be firstly transmitted.
All-High-Before-Low: All packets will be assigned to either high priority queue or low priority queue.
4 Queue WRR (Weight-Round-Robin): Set the ratio of the transmitting packet.
Function description: This is the page that allows you to configure QoS (Quality of Service) to enhance network
performance. This switch supports three types of QoS.
Parameter description: Mode: There are three Priority Modes to select.
First-In-First-Service: The first receiving packet will be firstly transmitted.
All-High-Before-Low: All packets will be assigned to either high priority queue or low priority queue.
4 Queue WRR (Weight-Round-Robin): Set the ratio of the transmitting packet.
Figure 4-20. Priority Mode screen.
4.6.2 Class of Service
Function name: Class of Service
Function description: You can set QoS mode of per port by different types of services. The switch supports four queues:
TCP/UDP, IP TOS/DS, 802.1p, and Physical Port.
Function description: You can set QoS mode of per port by different types of services. The switch supports four queues:
TCP/UDP, IP TOS/DS, 802.1p, and Physical Port.