Bixolon SRP-F310/312 Manual De Usuario

 

 

 

Figure 2-1 AC Adapter Installation 

 

1. Make sure the printer is turned off with the 

    side of the switch. 

2. Plug the power cord into the SMPS 

  on the printer.   

3. Plug the AC Adapter power cord into the wall outlet. 

 

Figure 2-2 I/F Cable Installation 

 

1. Turn off the printer, host ECR and Computer. 
2. Plug RS-232, USB or Parallel Cable connector 
    into the I/F connector on the printer. 
3. Tighten the screws on both sides of the connector. 
4. Turn on the printer, host ECR and Computer. 

 

Figure 2-3 USB B-TYPE Cable Installation 

 
1. Turn the printer off. 
2. Plug USB cable connector into 
    the connector on the printer. 

 

 

Figure 2-4 Cash Drawer Cable Installation 

 
1. Turn the printer off. 
2. Plug the cash drawer cable connector into 
    the connector on the printer. 
    (To remove the cash drawer cable, press 

the clip on the connector, grasp the connector 
and pull it out.) 

 

 

USB Connector 

UAB-B Cable 

Interface Cable

Interface connector