Bixolon Receipt Printer SRP-270 Manual De Usuario
Rev. 3.02
- 48 -
SRP-270
8. Appendix (Spec of SMP-710/710N)
8-1 Specifications
8-1-1 Printing specifications
Item
Description
Printing method
serial impart dot-matrix
Head wire configuration
9-pin serial type
Dot pitch
0.352mm(1/72")
Dot wire diameter
0.3mm(0.01")
Printing direction
Bidirectional with logic seeking
Printing width
63.5mm(2.5")
Line feed
4.233mm(1/6") (default setting)
Paper feed method
Friction feed
Paper feed speed
Approximately 6.2 inches/second (during continuous paper feeding)
Characters per line
See the table on the next page
Characters per inch
See the table on the next page
Total dot count
(horizontal direction)
(horizontal direction)
7×9 font (400 half-dot positions per line)
9×9 font (400 half-dot positions per line)
9×9 font (400 half-dot positions per line)
Print speed
Approximately 4.6 lines/second (40 columns, 16cpi)
Approximately 8.4 lines/second (16 columns, 16cpi)
Approximately 8.4 lines/second (16 columns, 16cpi)
NOTE: If the print duty ratio is too high, the operation of the print
※
head is stopped by the duty limit.
In such circumstances, the print speeds shown above cannot be guaranteed.
cpi=characters per inch.
cpi=characters per inch.