Bissell HEALTHY HOME 16N5 Manual De Usuario

w w w . b i s s e l l . c a 

1 - 8 0 0 - 2 6 3 - 2 5 3 5

Tool required: phillips screwdriver
1.  Slide upper handle into lower handle by

pushing forward. Insert two long screws into

the holes marked with arrows and tighten

both until snug.

2.  Attach hose rack by placing the rack over

the center back portion of the vacuum.

Be sure to feed the power cord through

the hole in the center of the rack. Line up

both screws holes and use the two smaller

screws to attach. Tighten both until snug.

3.  Attach hose by placing the tabbed end into

the lower left opening on corded side of the

vacuum. Make sure the tab on the hose cuff

and the hole in the vacuum line up. Place

the working end of the hose into the hole on

the side with the extension wand guides.

4.  Arrange the hose so it lays between the

vacuum and the rack.

5.  Store the TurboBrush on the front of the handle

by aligning the slot on the bottom with the tab

on the handle. Snap into place.

6.  Store the Combination Brush in the slot shown.

7.  Make sure the crevice tool is inside the

extension wand. Store tools on vacuum as

shown.

Telescoping  

Extension  

Wand