Bissell 6596 Manual De Usuario

 

This User’s Guide has been designed to help you 

get the most satisfaction from your BISSELL PowerForce 
Turbo Bagless. You’ll find assembly and operating 
instructions, safety precautions, as well as maintenance 
and troubleshooting instructions. Please read this Guide 
thoroughly before assembling your vacuum cleaner. 

Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate and 
organize all parts before assembly. Familiarize 
yourself with the parts and where they fit. Following 
this User’s Guide will greatly enhance your ability 
to get the most performance from your BISSELL 
PowerForce Turbo Bagless for many years.

The only tool you’ll need to assemble your vacuum 
cleaner is a screwdriver.

Locate the vacuum Handle and remove the screw 
packet taped to the base of the Handle.

Stand the vacuum upright and place the Handle on the 
top of the vacuum body as shown.

Insert the screws provided from the screw packet into 
the existing holes on each side. Tighten securely with 
a screwdriver.

Attach the Twist ‘n Snap

™

 Hose by lining up the tabs on 

the base with the corresponding notches on the back of 
the vacuum as shown.

Turn the Twist ‘n Snap Hose to the right to lock the hose 
into place.

Grasping the Quick Reach Handle, slide the end of the 
Hose Wand onto the Hose Wand Base. Snap the Hose 
into the Hose Clip.

Slide the Extension Wand and the Crevice Tool together 
into the storage clip on the side of the vacuum.

Snap the Combination Tool into the storage clip on the back of 
the vacuum.

The TurboBrush

®

 Bracket slides onto the front of the Handle. 

Attach the Bracket by aligning the pegs with the holes on the 
Handle as shown and pulling down until it is locked into place.

ug203-2829_6596_1105.indd   5

ug203-2829_6596_1105.indd   5

1/11/06   4:03:35 PM

1/11/06   4:03:35 PM