Bissell 3522 Manual De Usuario

This User’s Guide has been designed to help you get 
the utmost satisfaction from your BISSELL PowerForce. 
You’ll find assembly and operating instructions, safety 
precautions, as well as maintenance and troubleshooting 
instructions. Please read this Guide thoroughly before 
assembling your vacuum cleaner. 

Pay particular attention to the product diagram, assembly 
instructions, and part names. Locate and organize all 
parts before assembly. Following this User’s Guide will 
greatly enhance your ability to get the most performance 
from your BISSELL PowerForce for many years.

The only tool you’ll need to assemble your vacuum 
cleaner is a screwdriver.

Stand the vacuum upright and slide the base of the Handle 
firmly into the grooves at the top of the vacuum body.

Check to be sure the Handle is fitted to the vacuum 
body. If there is a gap in front, continue to push firmly 
until the Handle is flush.

Insert one screw from the assembly packet into the 
existing hole in the back of the Handle. Tighten securely 
with a screwdriver.

Position the Hose Assembly on the back of the 
vacuum as shown.

Attach the Hose Collar with two screws from the 
assembly packet. Tighten securely with a screwdriver.

Line up the tabs on the base of the Twist ‘n Snap Hose 
with the corresponding tab notches on the hose collar as 
shown. Turn the Twist ‘n Snap Hose to the left to lock the 
hose into place.

Grasping the Quick Reach

®

 Handle, slide the end 

of the Hose Wand onto the Suction Intake Opening. 
Snap the Hose into the Hose Clip.

Place the Crevice Tool inside the Extension Wand and 
slide them into the Storage Clip as shown.

Snap the Combination Upholstery/Dusting Brush Tool 
into the Storage Clip as shown.

Hose 
Collar