Bionaire BT014-U Prospecto

PLeaSe read and SaVe tHeSe

imPOrtant SaFetY inStrUCtiOnS

When using electrical appliances, basic safety precautions

should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the

instruction manual.

3. To protect against electrical shock do not immerse

unit, plug or cord in water or spray with liquids. Plug

the appliance directly into a 120V AC electrical outlet.

4. Close supervision is necessary when any appliance is

used by or near children.

5. Unplug from outlet when not in use, when moving

fan from one location to another, before putting on

or taking off parts and before cleaning.

6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or

flammable fumes.

8. To avoid fire hazard, NEVER place the cord under

rugs or any parts near an open flame, cooking or

other heating appliance.

9. Do not operate any appliance with a damaged cord

or plug after the appliance malfunctions, or has been

dropped/damaged in any manner.

10. The use of attachments not recommended or sold by

the appliance manufacturer may cause hazards.

11. Do not use outdoors.
12. Do not let the cord hang over the edge of a table,

counter or come in contact with hot surfaces or leave

exposed to high traffic areas.

13. To disconnect, grip plug and pull from wall outlet.

Never yank on cord.

14. Always use on a dry, level surface.
15. Do not operate fan until fully assembled with all

parts properly in place.

16. This product is intended for household use ONLY and

not for commercial or industrial applications.

17.

WarninG: To reduce the risk of electrical shock

injury to persons, do not use in window.

18.

WarninG: To reduce the risk of fire or electric

shock, do not use this fan with any solid-state speed

control device.

PLeaSe read and SaVe

tHeSe imPOrtant

SaFetY inStrUCtiOnS

aSSemBLY inStrUCtiOnS:

(See FiGUre 1)

Your fan comes fully assembled and is ready for use.

OPeratinG inStrUCtiOnS:

(See FiGUre 2)

1. Set the fan on a dry level surface.

2. Plug power cord into any standard 120V AC outlet.

3. To turn the fan on, press either speed control button.

1-Low, 2=high.

4. To turn the fan off press the on/off button.

5. To turn on the oscillation feature press the oscillation

button once. To turn the oscillation feature off press

the oscillation button once.

CLeaninG/maintenanCe

inStrUCtiOnS:

Follow these instructions to correctly and safely care

for your fan.

Please remember:

• Always unplug the fan before cleaning.

• Do not allow water to drip on or enter

into fan housing.

• Be sure to use a soft cloth moistened with a

mild soap solution.

• Do not use gasoline, thinner or benzene as a cleaner.

Fan CLeaninG:

Clean the fan grill, housing and

base with a soft, damp cloth. Do not attempt to remove

the fan blade. Please use caution around the motor

housing area. Do not allow the motor or other electrical

components to be exposed to water.

Fan StOraGe:

When storing your fan in the off season, it is important

to keep it in a safe dry location. It is important to protect

the fan head from dust. WE STRONGLY RECOMMEND

USING THE ORIGINAL BOx FROM PURCHASE

Figure 2

If you have any questions regarding your product or

would like to learn more about other Bionaire

products, please contact our Consumer Service

Department at 1-800-253-2764 or visit our website at

www.bionaire.com.

Figure 1

1. On/Off Button
2. Speed Control Buttons

1 = Low speed

2 = High speed

3. Oscillation Button

F e at U r e S - O P e r at i O n S

C L e a n i n G a n d m a i n t e n a n C e

tHiS aPPLianCe HaS a POLarized PLUG (one blade is wider than

the other). to reduce the risk of electric shock, this plug is intended

to fit in a polarized outlet only one way. if the plug does not fit

fully in the outlet, reverse the plug. if it still does not fit, contact

a qualified electrician to install the proper outlet.

dO nOt attemPt tO mOdiFY tHiS PLUG Or deFeat tHiS

SaFetY FeatUre in anY WaY.

BT014-U_Eng.indd 2

12/3/08 12:05:43 PM