Biostar P4M800Pro-D1 Manual De Propietario

Descargar
Página de 82
P4M800Pro-D1 BIOS SETUP 
 
BIOS Setup 
Introduction 
This manual discussed Phoenix-Award™  Setup program built into the ROM BIOS. The  
Setup program allows users to modify the basic system configuration. This special 
information is then stored in battery-backed RAM so that it retains the Setup information 
when the power is turned off. 
 
The Phoenix-Award BIOS™  installed in your computer system’ s ROM (Read Only 
Memory) is a custom version of an industry standard BIOS. This means that it supports 
Intel Pentium 
®
 
4 processor input/output system. The BIOS provides critical low-level 
support for standard devices such as disk drives and serial and parallel ports. 
 
Adding important has customized the Phoenix-Award BIOS™ , but nonstandard, features 
such as virus and password protection as well as special support for detailed fine-tuning 
of the chipset controlling the entire system. 
 
The rest of this manual is intended to guide you through the process of configuring your 
system using Setup. 
 
Plug and Play Support   
These PHOENIX-AWARD BIOS supports the Plug and Play Version 1.0A specification. 
ESCD (Extended System Configuration Data) write is supported. 
 
EPA Green PC Support     
This PHOENIX-AWARD BIOS supports Version 1.03 of the EPA Green PC 
specification. 
 
APM Support 
These PHOENIX-AWARD BIOS supports Version 1.1&1.2 of the Advanced Power 
Management (APM) specification. Power management features are i mplemented via the 
System Management Interrupt (SMI). Sleep and Suspend power management modes are  
supported. Power to the hard disk drives and video monitors can be managed by this 
PHOENIX-AWARD BIOS. 
 
ACPI Support
 
Phoenix-Award ACPI BIOS support Version 1.0b of Advanced Configuration and Power 
interface specification (ACPI).  It provides ASL code for power management and 
device configuration capabilities as defined in the ACPI specification, developed by 
Microsoft, Intel and Toshiba.