Binatone AQUAREL XDC1520 Manual De Instrucciónes

ENGLISH

37

This function is useful if your telephone is connected to a PBX. In this case, when

placing a call to an automatic exchange, it will be necessary to dial a preliminary
number. This function does that automatically.

1. With the telephone in the standby mode, press the MENU button [3].
2. By pressing the button [5], select the DETAILED menu item, then press OK  [3].
3. By pressing the button [5], select the PBX menu item, then press OK  [3].
4. Enter the PIN-code, then press OK  [3].
5. By pressing the 

 or 
 button [5], select ON.

6. Press the 

 button [5]. Then by pressing the button [8], enter the preliminary

number consisting of not more than three figures.

7. Press  OK  [3]  to confirm.

1. With the telephone in the standby mode, press the MENU button [3].
2. By pressing the button [5], select the DETAILED menu item, then press OK  [3].
3. By pressing the button [5], select the PBX menu item, then press OK  [3].
4. Enter the PIN-code, then press OK  [3].
5. By pressing the 

 or 
 button [5], select OFF.

6. Press  OK  [3]  to confirm.

This function allows the blocking of calls to specific numbers and vice versa and

to permit making calls to specific numbers.
1. With the telephone in the standby mode, press the MENU button [3].
2. By pressing the button [5], select the DETAILED menu item, then press OK  [3].
3. By pressing the button [5], select the CALL BARRING menu item, then press

OK  [3].

4. Enter the PIN-code, then press OK  [3].
5. By pressing the 

 or  button [5], select the number of the handset where you

intend to bar or allow making calls.

6. Press  OK  [3].
7. By pressing the 

 or 
 button [5], select the required mode:

 OVERRIDE – no restrictions.

 BAR ALL – only to answer incoming calls.