Binatone SPEAKEASY COMBO 2005 TRIPLE Manual De Usuario

32

 menu under TAM main menu. 

If you have difficulty with your phone, please try the suggestions listed below.  

 

No dialling tone when pressing the

a.  The connection cord of the base 
station is not plugged in. 
b.  The adapter cord is not plugged in 

correctly in the base station. 

c.  The line is busy, as another 
handset is used. 
d.  Wrong telephone line cord.

a.  Check the connections.  Unplug

 

and plug back in the mains.  

Check that the telephone line cord 
has been plugged into the base 
station and the phone socket. 
b.  Check the base station plug and

 

the 230V plug (remove and plug-in).

c.   Wait until the line is unoccupied. 
d.  Use the original telephone line cord

When connected to a PBX, no and/or 

wrong connection after dialling.

Dialling prefix is needed. 

Insert the dialling prefix 

 is displayed.

a.  Base station out of range. 
b.  Base station not connected to 
mains. 

Reduce the range. 
Connect base station to mains. 

The call does not work. 

Service not activated or wrong 
operator or wrong setting 

Check your Subscription with network 
or change the dial mode. 

No display. 

Empty battery 

Recharge battery 

Please contact the technical support of the network provider for further
information. 
This telephone is not equipped with an earth function! Therefore some of

the functions may be limited when used in PBX systems. 

<TALK> key 

supplied. 

If the fault persists:
Disconnect all other instruments connected to the same line as this, and try
to make a call.
Disconnect the base unit from the telephone line and plug a different phone
into the master socket. Try making a call. If this works the line is ok.
If the call does not work, and you are using a two-way socket adapter,

remove it and plug the telephone directly into the socket. If the call now
works, the adapter may be faulty.