Binatone iDECT C3i system Manual De Usuario

1. Press and hold <PAGE> on the base station for more than five seconds, to

To register a new handset to your base:

minute, so the following handset sequence must be completed 

within this time.

2. Press <MENU> and <UP/DOWN> to select

 

3. Press <OK> and you are requested to enter the 4-digit system PIN. 

4. Enter the 4-digit system PIN. 

5. Press <OK> to confirm, and the display will show SEARCHING.
If the handset registration is successful, you will hear a confirmation tone and

 

The handset will automatically be allocated the next available handset number. 
This handset number is shown in the handset display in standby mode.  If the

 

1. Press <MENU> and <UP/DOWN> to select DEFAULT.
2.   Press <OK> and you are requested to enter the 4-digit system PIN. 
3.   Enter the 4-digit system PIN. 
4.   Press <OK> to display CONFIRM? 
5.   Press <OK> to confirm, and the phone will be reset to its default settings.

handset registration is unsuccessful, the <antenna icon> will still flash.

IMPORTANT: When you purchase an iDECT C3i system, all handsets are 

You can register additional handsets to have up to five handsets per base unit,  

shown on its display. (Note: each handset 

Handset registration is only necessary when you buy extra handsets or if a

already registered to the base, so you do not need to register them.

handset has become faulty.

with each handset's number (1 to 5)  

can only be registered to one base.)

You can reset your phone to the default settings .  After a reset, all your

 

for about 1 

put the base station into registration mode. It will stay in registration mode

the <antenna icon> will stop flashing. 

personal settings , call list entries, redial list entries, and answering machine

messages will be deleted, but your phonebook remains unchanged.

24