Binatone iDECT C3i system Manual De Usuario

Descargar
Página de 36
2.   Press <OK> and <UP/DOWN> to select 
TAM SETTINGS
3.   Press <OK> and <UP/DOWN> to select 
RECORD TIME (Available 
 
180S, or UNLIMITED)
4.   Press <OK> and <UP/DOWN> to select your desired recording time. 
5.   Press <OK> to confirm.
 
8.5.7
Change the Compression Rate 
1.   Press <MENU> and <UP/DOWN> to select 
ANS. MACHINE.
2.   Press <OK> and <UP/DOWN> to select 
TAM SETTINGS
3.   Press <OK> and <UP/DOWN> to select 
COMPRESSION
4.   Press <OK> and <UP/DOWN> to select your desired compression rate. 
5.   Press <OK> to confirm. 
8.5.8
Activate Remote Access
8.5.8.1 Change the 4-Digit Remote Access PIN 
1.   Press <MENU> and <UP/DOWN> to select 
ANS. MACHINE
2.   Press <OK> and <UP/DOWN> to select 
TAM SETTINGS
3.   Press <OK> and <UP/DOWN> to select 
CHANGE PIN
  Press <OK> and enter the Old PIN.  (Default Remote Access PIN is 0000). 
5.   Press <OK> and enter the New PIN. 
 
6.   Press <OK> and enter the New PIN again. 
Note: If the new PIN entered in Step 6 is not the same as the new system PIN  
ntered in Step 5,  you must enter the new system PIN at step 5 again.
7.  Press<OK>to reconfirm.
Three different compression rates (HIGH, MEDIUM and LOW) are provided for
you to select different quality levels of recording incoming message.  The lower
shorter the total recording time available. (For example, about 9 minutes on
LOW, 12 minutes on MEDIUM, and 18 minutes on HIGH.)
Your phone lets you check your messages, or otherwise operate your 
answering machine, by calling the answering machine when you are away from 
PIN code is used to prevent other people from 
 
home and then dialling a 4-digit remote access PIN from a tone-dialing phone.
 The 4-digit
remote access 
unauthorised access 
of your answering machine.
 options: 60S, 120S,
the compression rate, the higher the recording quality level attained, but the 
29