Binatone iDECT C3i system Manual De Usuario

1)  Plug the power supply   & line cord 

into the base station.

2) Plug the power adapter into a 230Vac, 50Hz mains socket, 

      and the line cord into your telephone line socket.
3)  Always use the cables provided in the box

Warning: Use only the provided adaptor, using other power
supplies may cause a hazard.  

Warning: Install the base unit in a position where the mains adapter plug

Note: The base unit needs mains power for normal 

operation, not just for charging the handset batteries.

1) Place the battery pack as indicated, ensuring the 

      polarity is correct.

2) Position the battery compartment cover over the batteries

      and slide up to click into place.
3) Put the handset on the base and charge for 15 hours before using the

      handset for the first time. The handset will give a beep when it is properly 

      placed on the base or charger.

If you connect your telephone to a line with 

insert a micro-filter between the telephone 

and the telephone line, otherwise you may get 

interference between the telephone and the broadband,

which could cause problems. 

a broadband connection, you will need to

In a home with broadband, every telephone must have a micro-filter connected, 

not just the one at the telephone point that your modem is connected to. 

If you need more broadband micro-filters, contact your broadband supplier. 

will reach an easily accessible mains socket. Never try to lengthen the

mains power cable.

5