Bil-Jax Personal Lift AERIAL WORK PLATFORMS Hydraulic Boom Lift Manual De Usuario

Ensure the following general safety precautions are followed before operating the 
XLB-4319 Hydraulic Boom Lift. 

•  ALWAYS survey the usage area for potential hazards such as untamped earth 

fills, unlevel surfaces, overhead obstructions, and electrically charged conduc-
tors or wires. Be aware of any potential hazards and always consider what could 
happen. Watch for moving vehicles in the operating area. 

•  ALWAYS read, understand, and follow the procedures in this manual before at-

tempting to operate equipment. 

•  ALWAYS inspect the equipment for damaged or worn parts. Check for cracked 

welds, hydraulic leaks, damaged wiring, loose wire connectors, damaged out-
riggers, low tire pressure, uneven tire wear, or tire damage. Also check for any 
improper operation. NEVER operate equipment if damaged in any way. Im-
properly operating equipment must be repaired before using. 

•  ALWAYS wear proper clothing for the job. Wear protective equipment as re-

quired by federal, state, or local regulations. The operator MUST wear a safety 
harness and lanyard. 

•  ALWAYS locate, read, and follow all directions and warnings displayed on the 

equipment. 

•  ALWAYS inspect the equipment for “DO NOT USE” tags. NEVER use equip-

ment tagged in this way until all repairs are made and all “DO NOT USE” tags 
are removed by authorized maintenance personnel. 

•  ALWAYS make sure the basket and outrigger shoes are free of mud, grease, or 

other slippery material to reduce the possibility of slipping. 

•  NEVER allow improperly trained personnel to operate this equipment. Only 

trained and authorized personnel shall be allowed to operate this equipment. 

•  NEVER operate this equipment if you are under the influence of alcohol or 

drugs, or if you feel ill, dizzy, or unsteady in any way. Operators must be physi-
cally fit, thoroughly trained, and not easily excitable. 

•  NEVER modify, alter, or change the equipment in any way that would affect its 

original design or operation in any way. 

•  NEVER operate this equipment in ways for which it is not intended.