Bernina 750 QE Manual De Propietario

Safety Instructions

When using an electrical appliance, basic safety 

precautions should always be followed, including 

the following:

Read all the instructions before using this 

sewing-/embroidery computer. 

To reduce the risk of electrical shock:

1.  The sewing-/embroidery computer should 

never be left unattended when plugged in.

2.  Always unplug this sewing-/embroidery 

computer from the electrical outlet 

immediately after using and before cleaning.

3.  LED Radiation – Do not view directly with 

optical instruments. Class 1M LED product.

To reduce the risk of burns, fire, electric shock or 

injury to persons:

1.  Use this sewing-/embroidery computer only 

for purposes as described in this manual. Use 

only attachments, accessories and parts 

recommended by the manufacturer. 

2.  Do not allow this sewing-/embroidery 

computer to be used as a toy. Close attention 

is necessary when this sewing-/embroidery 

computer is used by or near children and 

infirm persons. The sewing-/embroidery 

computer is not intended for use by persons 

(including children) with reduced physical, 

sensory or mental capabilities or lack of 

experience and knowledge, unless they have 

been given supervision or instruction 

concerning use of the sewing-/embroidery 

computer by a person responsible for their 

safety. To ensure children do not play with 

the sewing-/embroidery computer they must 

be supervised.

3.  Never operate this sewing-/embroidery 

computer if:

it has a damaged cord or plug

it is not working properly

it has been dropped or damaged

it has fallen into water

Return the sewing-/embroidery computer to 

your local authorized BERNINA dealer for 

examination or repair.

4.  Never operate the sewing-/embroidery 

computer with any air openings blocked. 

Keep ventilation openings of the sewing-/

embroidery computer free from the 

accumulation of lint, dust and loose cloth.

5.  Keep fingers away from all moving parts. 

Special care is required around the sewing 

needle.

6.  Never insert any objects into any openings on 

the sewing-/embroidery computer.

7.  Do not use the sewing-/embroidery computer 

outdoors.

8.  Do not operate the sewing-/embroidery 

computer where aerosol products (sprays) or 

oxygen are being used or where oxygen is 

being administered.

9.  Do not pull or push the fabric while stitching. 

This may deflect the needle, causing it to 

break.

10. Do not use bent needles.

11. Always use the original BERNINA stitch plate. 

The wrong stitch plate can cause needle 

breakage.

12. To disconnect, turn power switch to «0» (off), 

then remove the plug from the outlet. Do not 

unplug by pulling the cord, instead grasp the 

plug to pull it from the outlet.

13. Turn power switch to «0» (off) when making 

any adjustments in the needle area, such as 

changing the needle or the presser foot, etc.

14. Always unplug the sewing-/embroidery 

computer from the electrical outlet when 

carrying out cleaning or maintenance work or 

any other user servicing adjustments 

mentioned in this manual.

15. This sewing-/embroidery computer is provided 

with double insulation (except USA and 

Canada). Use only identical replacement 

parts. See instructions for servicing of double-

insulated products.

034247.71.04_2014-02_Manual_B750_EN