Bernina 710 Manual De Propietario

Safety Instructions

When using an electrical appliance, basic safety 

precautions should always be followed, including 

the following: 

Read all instructions before using this sewing 

computer.

To reduce the risk of electrical shock:

1.  The sewing computer should never be left 

unattended when plugged in.

2.  Always unplug the sewing computer from the 

electrical outlet immediately after using and 

before cleaning.

3.  LED Radiation – Do not view directly with 

optical instruments. Class 1M LED product.

To reduce the risk of burns, fire, electric shock or 

injury to persons:

1.  Use the sewing computer only for purposes 

as described in this manual. Use only 

attachments/accessory recommended by the 

manufacturer.

2.  Do not allow the sewing computer to be used 

as a toy. Close attention is necessary when 

this sewing computer is used by or near 

children and infirm persons. This sewing 

computer is not intended for use by persons 

(including children) with reduced physical, 

sensory or mental capabilities, or lack of 

experience and knowledge, unless they have 

been given supervision or instruction 

concerning use of the sewing computer by a 

person responsible for their safety. Children 

must be kept under supervision to ensure that 

they do not play with the sewing computer.

3.  Never operate this sewing computer if:

it has a damaged cord or plug,

it is not working properly,

it has been dropped or damaged,

it has fallen into water

Take the sewing computer to the nearest 

authorized BERNINA dealer for examination 

or repair.

4.  Never operate the sewing computer with any 

air vents blocked. Keep ventilation openings 

of the sewing computer free from lint, dust 

and/or fabric bits.

5.  Keep fingers away from all moving parts. 

Special care is required around the sewing 

needle.

6.  Never drop or insert any objects into any 

opening on the sewing computer.

7.  Do not use the sewing computer outdoors.

8.  Do not operate the sewing computer where 

aerosol products (spray) or oxygen is being 

administered.

9.  Do not pull or push the fabric while stitching. 

This may deflect the needle, causing it to 

break.

10. Do not use bent needles.

11. Always use the original BERNINA stitch plate. 

The wrong stitch plate can cause needle 

breakage.

12. To disconnect, turn power switch to «0» (off), 

then remove the plug from the outlet. Do not 

unplug by pulling the cord, instead grasp the 

plug to pull it from the outlet.

13. Turn power switch to «0» (off) when making 

any adjustments in the needle area, such as 

changing the needle or the presser foot, etc.

14. Always unplug the sewing computer from the 

electrical outlet when carrying out cleaning or 

maintenance work or any other user servicing 

adjustments mentioned in this manual.

15. This sewing computer is provided with double 

insulation (except USA and Canada). Use 

only genuine replacement parts. Please note 

the advice on the servicing of double-

insulated products.

033805.51.04_2014-02_Manual_B710_EN