Benq SH940 Manual De Propietario

Connecting with video equipment

glish

Connecting component-video/RGB devices

Connect your RGB source (DVD player or HD set top box) to the RBGHV inputs. You can also use a
BNC- type component cable to connect your video devices. The audio connections are provided for
informational purposes only. You can also connect the separate audio cable to a suitable audio amplifier.

Connecting video devices

You need only connect a composite Video cable from the same device. The audio connections are
provided for informational purposes only. You can also connect the separate audio cable to a suitable
audio amplifier.

• If you have already made a Component Video connection between the projector and the video source

device, you need not connect to this device again using a composite Video connection as this makes an
unnecessary second connection of poorer picture quality. You need only connect using a composite
Video connection if Component Video is not supplied on the video source device (for example, with
some analog video cameras).

• If the selected video image is not displayed after the projector is turned on and the correct video source

has been selected, please check that the video source device is turned on and operating correctly. Also
check that the signal cables have been connected correctly.

AV equipment: DVD player, digital

tuner, etc.

Component video cable

Speakers

Audio cable

RGBHV cable

Video cable

AV equipment

Speakers

Audio cable

SH940_EN.book Page 18 Wednesday, October 3, 2012 2:36 PM