Benq SP831 Manual De Usuario

Operation

35

Switching input source

The projector can be connected to multiple devices at 
the same time. When starting up, the projector 
automatically search for the available signals.
Be sure the Auto Source Search function in the System 
Setup menu is On (which is the default of this 
projector) if you want the projector to automatically 
search for the signals.

You can also manually cycle through the available input 
sources.
1.

Press SOURCE on the projector or remote 
control. The source selection bar displays.
(Pressing ENTER in the System Setup > Input 
Source menu performs the same function.)

2.

Press  /  repeatedly until your desired signal is 
selected and press ENTER.
Once detected, the selected source information 
will display in the corner of the screen for 3 
seconds. If there is multiple equipment connected 
to the projector, you can press the key again to 
search for other signals.

The projector feature Split Screen and PIP functions 
which allow 2 different signals to be displayed at the 
same time. See 

 for details.

The brightness level of the projected picture will change 
accordingly when you switch between different input 
sources. Data (graphic) "PC" presentations using 
mostly static pictures are generally brighter than 
"Video" using mostly moving pictures (movies).

The input source type effects the options available for 
the Picture Mode. See

 for details.