Benq SP831 Manual De Usuario

Descargar
Página de 80
Operation
51
Displaying more than one picture source
 simultaneously
Your projector is capable of displaying pictures simultaneously from two input sources, 
which can be used to enhance your presentation in an interesting way.
Ensure the signals you want to display are correctly connected to the projector.
Splitting the screen
The projector is able to display two input sources by dividing the projection equally into two 
screens on the left and right sides. That is each source uses 640 x 768 pixels at most of the 
projection. To display the split screen:
Using the projector or remote control
Press   on the projector or SPLIT SCREEN/
ON on the remote control to split the projection 
screen and press further until a desired way of 
display is selected. 
To restore the projection to one big screen, press 
 or SPLIT SCREEN/OFF.
Using the OSD menu
1.
Press MENU and then press  /
 until 
the Display menu is highlighted.
2.
Press  
to 
highlight 
Split Screen and 
press ENTER. The Split Screen page 
displays.
3.
Highlight Split Screen and press 
/
 to 
select On.
The projector will select two currently active 
signals to display and the last viewed picture will 
be displayed on the right side as a main source. 
See 
 for the conflict source combinations. 
4.
To change the Left Source or Right 
Source, press   to highlight Left Source 
or Right Source, and press ENTER. The 
source selection page displays.
5.
Use  /  to highlight the source you want to display for the left or right window, and 
press ENTER to save the setting and go back to the Split Screen page.
6.
To make OSD settings to one of the two sources (Left or Right), highlight Active 
Window, and press 
/
 to select the source you want to make adjustments.
The settings made on the OSD menus will only take effect on the active window. 
 for exceptions.
7.
To change the way the pictures are displayed, highlight Split Screen Relationship and 
press 
/
 to select a desired way. See 
 for 
details.
Aspect Ratio
Digital Screen Shift
Keystone
Position
Overscan Adjustment
Digital Zoom
Pan
PIP
Split Screen
PC & Component YPbPr Tuning
Display
EXIT  Back
0
0
100%
Analog RGB
ENTER
Split Screen
Split Screen
Split Screen Relationship
Left
Right
Active Window
On
Equally Split
Right
EXIT  Back
Fill
Attachable Lens
Off