Beltronics RX75 PLUS Manual De Propietario
Quick Reference Card
1
I
Programming Details
Factory Default Settings
To reset RX75 PLUS to its original factory
settings, press and hold the “CITY” and
“VOL/MUTE” buttons while turning the
power on. The RX75 PLUS’s display will
provide a “Reset” message, accompanied
by an audible alert, acknowledging the
reset.
To reset RX75 PLUS to its original factory
settings, press and hold the “CITY” and
“VOL/MUTE” buttons while turning the
power on. The RX75 PLUS’s display will
provide a “Reset” message, accompanied
by an audible alert, acknowledging the
reset.
Bel Pro Remote
Quick Reference Card
Remove card along perforations
Remove card along perforations
Congratulations and Important Warning
Congratulations
Your new Bel Pro Remote is the most
advanced custom-installed radar/laser
detector available.
advanced custom-installed radar/laser
detector available.
The Bel Pro Remote includes long-
range X, K, and SuperWide Ka radar
capability, improved Digital Signal
Processing for superior range and reduced
false alarms, our patented Mute and
AutoMute, audible and visual band alerts,
and all the performance you’d expect from
Beltronics.
capability, improved Digital Signal
Processing for superior range and reduced
false alarms, our patented Mute and
AutoMute, audible and visual band alerts,
and all the performance you’d expect from
Beltronics.
In addition, your new Bel Pro Remote
introduces a new level of Radar/Laser
defense including:
• Blistering radar performance, for superior
defense including:
• Blistering radar performance, for superior
K, and Ka-band sensitivity
• New programmable laser blockers for
maximum against laser guns
• Advanced Programming lets you instantly
set up to 8 customized features
• Exclusive AutoScan
™
mode drastically
reduces false alarms, plus Highway and
City settings
City settings
• Ultra-bright alphanumeric display uses
280 LEDs for crystal clear information
• Exclusive Threat Display
™
tracks and
displays multiple radar signals and signal
strength
strength
• Exclusive Tech Mode
™
display provides
numeric frequency for any radar signals
• Standard remote Mute button provides
one-touch Mute, and volume adjustment
If you’ve used a radar detector before, a
review of the Quick Reference Guide on
page 4, and the Programming information
on pages 10 and 11 will briefly explain the
new features.
page 4, and the Programming information
on pages 10 and 11 will briefly explain the
new features.
If this is your first detector, please read
the manual in detail to get the most out of
your new RX75 PLUS’s performance and
features.
your new RX75 PLUS’s performance and
features.
Please drive safely.
IMPORTANT INSTALLATION WARNING
Your new RX75 PLUS must be installed by a
professional. Car Audio specialists and many
car dealers can install the RX75 PLUS for
you.
professional. Car Audio specialists and many
car dealers can install the RX75 PLUS for
you.
Attempting to install the Bel Pro
Remote without expertise in automotive
electronic installations can cause personal
injury during the installation, or can damage
your RX75 PLUS or your vehicle. If your
vehicle is damaged during installation, its
safety systems may be compromised, which
could cause personal injury or property
damage.
electronic installations can cause personal
injury during the installation, or can damage
your RX75 PLUS or your vehicle. If your
vehicle is damaged during installation, its
safety systems may be compromised, which
could cause personal injury or property
damage.
FCC Note:
Modifications not expressly approved by
the manufacturer could void the user’s FCC
granted authority to operate the equipment.
the manufacturer could void the user’s FCC
granted authority to operate the equipment.
An example of Programming
Here is how you would turn RX75 PLUS’s
AutoMute feature off.
Here is how you would turn RX75 PLUS’s
AutoMute feature off.
1 Enter the Program Mode by holding
both the CITY and VOL/MUTE buttons
down for 2 seconds. The RX75 PLUS will
beep twice and display
both the CITY and VOL/MUTE buttons
down for 2 seconds. The RX75 PLUS will
beep twice and display
Program.
2 Press and hold the REV button.
The RX75 PLUS will scroll through the
categories, starting with Power-on
indication (
The RX75 PLUS will scroll through the
categories, starting with Power-on
indication (
Pilot), then Power-on
sequence (
PwrOn), then Signal strength
meter (
Meter), and then AutoMute
(
aMute).
3 Release the REV button when the RX75
PLUS shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
the RX75 PLUS will display
PLUS shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
the RX75 PLUS will display
aMute ON.
(If you accidentally don’t release the
REV button in time, and the RX75 PLUS
goes to the next category, hold the REV
button down again, and after the RX75
PLUS scrolls through all categories, it will
begin again at the top of the list.)
goes to the next category, hold the REV
button down again, and after the RX75
PLUS scrolls through all categories, it will
begin again at the top of the list.)
4 Press the CHG button to change from
aMute ON to aMute OFF.
aMute ON to aMute OFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any button.
The RX75 PLUS will display
wait 8 seconds without pressing any button.
The RX75 PLUS will display
Complete,
beep 4 times, and return to normal
operation.
operation.
There are 8 user-selectable options so you
can customize your RX75 PLUS for your
own preferences.
can customize your RX75 PLUS for your
own preferences.
The buttons labeled CITY and
VOL/MUTE are also used to enter the
Program Mode, REVIEW your current
program settings, and to CHANGE any
settings as desired. The words PGM, REV
and CHG are located on the front of the
display.
Program Mode, REVIEW your current
program settings, and to CHANGE any
settings as desired. The words PGM, REV
and CHG are located on the front of the
display.
How to use Programming
1 To enter Program Mode, press and
hold both buttons down for 2 seconds.
(The unit will beep twice, and will display
the word “Program”).
hold both buttons down for 2 seconds.
(The unit will beep twice, and will display
the word “Program”).
2 Then press the REV button to REVIEW
the current settings. (You can either tap
the button to change from item to item, or
hold the button to scroll through the
items).
the current settings. (You can either tap
the button to change from item to item, or
hold the button to scroll through the
items).
3 Press the CHG button to change any
setting. (You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
setting. (You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
4 To leave Program Mode, simply wait
8 seconds without pressing any button.
(The unit will display Complete, beep 4
times, and return to normal operation).
8 seconds without pressing any button.
(The unit will display Complete, beep 4
times, and return to normal operation).