Beltronics RX75 Manual De Propietario

Power
Press the Power button to turn the RX75
on. (We recommend wiring the RX75 to a
switched circuit so that it will turn on/off
with your vehicles ignition).

Matrix Display
The RX75’s display will show “Highway,”
“AutoScan,” or “City” as its standard power-
on indication. Page 5. If you prefer, you can
choose other power-on indications. 
Page 11.

During an alert, the display will indicate

the radar band, and a precise bar graph for
the signal strength. Page 7.

You can program the RX75 for Threat

Display

™

, which displays multiple radar

signals and relative signal strength for each,
or choose TechDisplay

™

mode, which

provides the actual numeric radar
frequency. Pages 7-8.

The display can also show Safety Radar

text messages. Pages 18-19.

City Button
Switches sensitivity modes between
Highway, AutoScan

™

, and City settings.

In general, we recommend the AutoScan

™

mode.  Page 6.

Programming
The RX75 is ready to go – just turn it on. But
you can easily change 8 features for your
preferences. Press both buttons to enter the
Program Mode, then easily Review or
Change your settings. Pages 9-13.

VOL/MUTE Button
Briefly press this button on the display
controller, or the standard Remote Mute
button, to silence the audio for a specific
alert. (The audio will alert you to the next
encounter.)  Page 5.

AutoMute
The RX75’s patented AutoMute feature
automatically reduces the volume level of
the audio alert. Page 5. If you prefer, you
can turn AutoMute off. Page 9.

To turn the RX75 on, simply press the
Power button on the RX75’s Display/
Controller. When you turn the RX75 on, it
goes through a sequence of alerts.

If you prefer, you may program your

RX75 for a shorter power-on sequence. See
the Programming section for details.

After RX75’s start-up sequence is complete,
the matrix display will show “Highway,”
“AutoScan,” or “City” to show which 
sensitivity mode is selected.

If you prefer, you can select alternate

power-on displays. See the Programming
section for details.

Your RX75 has our patented AutoMute
feature. After the RX75 alerts you to a radar
encounter at your selected volume level, it
automatically reduces the volume to a lower
level. This keeps you informed without the
annoyance of a continuous full-volume alert.

If you prefer, you can turn the

AutoMute feature off. See the Programming
section for details.

The VOL/MUTE Button, located on RX75’s
front panel, or the installed Remote Mute
button, allows you to adjust the audio level. 

To change the volume level, simply

press either button and hold. An audible
tone will be generated, and the display will
provide a bar graph for the volume level.
When your preferred audio level is reached,
simply release the button. Your RX75 stores
this setting in memory, even when the
power is turned off. 

To mute the audio for a single specific

signal, briefly press the VOL/MUTE button
on the display controller, or the installed
Remote Mute Button during an alert. After
that radar encounter has passed, the volume
level will automatically reset and the audio
will alert you to the next encounter.

When the optional Laser Pro 904 is
installed, (see Programming section) the
Remote Mute button
can be used to 
manually stop
“blocking” once
you have
corrected your
speed. Simply press
the Remote Mute button twice during
the “Laser Blocking” message, and the
Laser Blocker’s will cease to transmit.
The Laser Blocker’s will cease to
transmit for one minute. Once this time
has expired, the Laser Blocker’s will 
automatically reset, and return to their
active state. A reset message will be displayed
to verify and acknowledge the reset.