Beltronics Pro 100 Manual De Propietario
Radar Antenna and Laser Lens
The rear panel of your Pro100 should have
a clear view of the road ahead. For best
performance, do not mount the Pro100
directly behind windshield wipers
The rear panel of your Pro100 should have
a clear view of the road ahead. For best
performance, do not mount the Pro100
directly behind windshield wipers
or tinted areas. Page 6
Alphanumeric Matrix Display
Your Pro100’s display will show Highway
or City as its power-on indication. If you
prefer, you can choose other power-on
indications. Page 12-14
Your Pro100’s display will show Highway
or City as its power-on indication. If you
prefer, you can choose other power-on
indications. Page 12-14
During an alert, the display will indicate
radar band, and a precise bar graph of signal
strength. Page 10
strength. Page 10
NOTE: In the Dark Mode the display
will not light during an alert. Page 9
Quick Reference Guide
To begin using your Pro100,
just follow these simple steps
1 Plug the small end of the power cord
into the side jack of the detector, and
plug the large end of the power cord
into your car’s lighter socket.
2 Mount your Pro100 on the windshield
using the supplied windshield mount.
3 Press the PWR button, located top left,
to turn the Pro100 on.
4 Press and hold the Volume/Mute
button to adjust the volume.
Please read the manual to fully understand
your Pro100’s operation and features.
your Pro100’s operation and features.
QuickMount Slot
Insert the Pro100’s adjustable Windshield
mount into this slot. Page 7
mount into this slot. Page 7
QuickMount Button
Press the button, and slide the Windshield
mount into one of its four locking positions.
Page 7
mount into one of its four locking positions.
Page 7
City Button
Switches between City and Highway,
settings. In general, we recommend
Highway. Page 9
settings. In general, we recommend
Highway. Page 9
Power
Press the PWR button to turn the Pro100
on or off.
on or off.
AutoMute
Your Pro100’s patented AutoMute
automatically reduces the volume level of
the audio alert after a brief period. If you
prefer, you can turn AutoMute off. Page 8
automatically reduces the volume level of
the audio alert after a brief period. If you
prefer, you can turn AutoMute off. Page 8
Programming
Your Pro100 is ready to go, just plug it
in and turn it on. But you can also easily
change 6 features for your preferences.
Page 12-14
in and turn it on. But you can also easily
change 6 features for your preferences.
Page 12-14
4
5
Rear Laser Port
Receives laser signals from behind the
vehicle.
Receives laser signals from behind the
vehicle.
Earphone Jack
Accepts standard mono 3.5mm earphone.
Accepts standard mono 3.5mm earphone.
Brightness Button
Press to adjust display brightness. There are
three brightness settings, plus Dark Mode.
Press to adjust display brightness. There are
three brightness settings, plus Dark Mode.
In the Dark Mode, the power-on
indication will be changed to a “HD” or “CD”
(indicating Highway Dark or City Dark). In
the Dark Mode, the Pro100’s meter will not
display during an alert, only the audio will
alert you. Page 9
(indicating Highway Dark or City Dark). In
the Dark Mode, the Pro100’s meter will not
display during an alert, only the audio will
alert you. Page 9
Power Jack
Plug the power cord into this connector.
Page 6
Plug the power cord into this connector.
Page 6
Volume and Mute Button
Press and hold the Volume/Mute button to
adjust the alert volume level. Page 8
Press and hold the Volume/Mute button to
adjust the alert volume level. Page 8
Briefly press this button to silence the
audio for a specific alert. (The audio will
alert you to the next encounter.) Page 8
alert you to the next encounter.) Page 8