Beko 15LB250MID Manual De Usuario

10 

MAIN MENU

PICTURE

SOUND

PROGRAM TABLE

SETUP

FEATURES

SELECT

EXIT

When you press the red 

STANDBY 

button on your remote control while 

your television is switched on, the 

sound and the picture will go off. 

In the stand-by mode, the power 

indicator of your television will glow 

brighter. To switch your television 

back on, either press any numeric button or 

PR+/PR- buttons.
Caution!  If you are not going to use your 

television for a long time, unplug its power 

cable from the socket.

You may switch to the previous or 

next program by pressing the 

P-/P+ 

buttons located on your television and 

your remote control. You may enter 

the number of the program you would 

like to select using the numerical 

buttons. For example, to switch 

to the program number 12, press 

respectively the numeric buttons 1 

and 2 on your remote control. You 

can perform the program selection 

also from the Program Table. See page 9 for 

the program table.

Press the 

AV button on your 

remote control. 

SOURCE menu 

will be displayed. Select 

ANALOGUE or desired AV mode 

with 

Up/Down movement buttons 

and confirm with 

OK button so that 

your television will switch to the 

source you have selected.

To temporarily mute the sound of 

your television, press the 

MUTE 

button on your remote control. In 

that case, 

MUTE symbol will appear 

on the screen. When you press the 

same button a second time, the sound will 

be restored. If you press the 

VOL+ button 

while in the Mute mode, the sound level is 

increased and the Mute function is aborted.

Allows you to switch between the 

current program you watch and the 

last selected program. For example, 

if you change the channel to Program 

11 while you were watching Program 1, press 

SWAP button to switch back to Program 

1. Press 

SWAP button to switch back to 

Program 11 again.

Press the 

MENU button. The Menu 

including all the setting menus will 

appear on the screen. Navigate 

through the Menu titles with the 

Down movement buttons and press 

the 

OK button to select the desired 

menu. If you want to exit the menu 

in any step, or return to the previous 

menu while you are in a sub menu, 

just press the 

BACK or MENU button.