Beko 19WLP530HID Manual De Usuario

-15-

Helpdesk: 0845 600 4911

Select the system in which you would like to make the search from the 

System tab 

by pressing the 

Right/Left movement buttons and move to the Channel tab by 

pressing the 

down movement button. Press OK on your remote control to select 

“S”” band or “C”” band and enter the channel number with numeric buttons. Move 

onto the 

Program No tab and enter the channel number in which you would like to 

have the channel stored. If the broadcast viewed on the screen is of your desired 

quality, press the 

Red button on your remote control to store the action into memory. 

The channel will be stored according to the program number of your choice. You can 

tune and store in memory other channels the same way. In the event that you wish to 

exit the menu for any reason, simply press the 

EXIT button.

Select 

Analogue Manual Tuning by pressing the Up/

Down movement buttons in the CHANNEL SETUP menu 

and confirm by pressing the 

OK button. Analogue Manual 

Tuning menu will be displayed.
Note: Select SYSTEM I for UK.

Select 

Analogue Manual Tuning by pressing the Up/

Down movement buttons in the CHANNEL SETUP menu 

and confirm by pressing the 

OK button. Analogue Manual 

Tuning menu will be displayed.
Note: Select SYSTEM I for UK.

Analogue Manual Tuning

System

I

Channel

C  4

Fine tuning

+00

Search
Programme no

1

Skip

No

Frequency

Select

Save
Back
Exit

62.25 Mhz

Analogue Manual Tuning

System

I

Channel

C  4

Fine tuning

+00

Search
Programme no

1

Skip

No

Frequency

Select

Save
Back
Exit

62.25 Mhz

In the 

Program no tab, enter the channel number where you would like to store the 

searched channel. Select the system in which you would like to make the search 

from the 

System tab by pressing the Right/Left movement buttons and move to 

the 

Channel tab by pressing the down movement button. Press OK on your remote 

control to select 

“S”” band or “C”” band, scroll to the Search tab by pressing 

the 

down movement button and press Right/Left movement buttons to start the 

search. Press the 

Red button on your remote control to store the channel you found. 

The channel will be stored to the channel number of your choice.

If the channel you found is not of the desired quality and requires Fine Tuning, then 

select the 

Fine tuning tab by pressing the Down movement button in the Analogue 

Manual Tuning menu. Using the Left/Right movement buttons on your remote 

control, adjust the broadcast displayed on the screen to your desired quality. Under 

normal circumstances, you will not require to use the Fine Tune function. The AFC 

values of your television will automatically adjust and lock themselves to the channel. 

However, you might need it in case the television transmitters do not operate 

according to the standards. Press the 

Red button on your remote control to store the 

settings you made.