Beko 19WLP530HID Manual De Usuario

-18-

Helpdesk: 0845 600 4911

Warning: Deleting a channel will be permanent. Full channel scan will be necessary 

to restore the deleted channels. 

Select the channel you want to delete from the Programme Table menu with 

Down buttons and press the “YELLOW” button on your remote control. The tab 

of the channel to be deleted will become yellow. If you press the 

GREEN button, 

Warning! You are about to permanently delete a channel warning message 

is displayed. Select 

YES by pressing the right/left navigation buttons to delete the 

channel or select 

NO to cancel deleting. If you select the channel with YELLOW 

button and press the 

RED button, Warning! You are about to permanently 

delete all channel warning message is displayed. Select YES by pressing the right/

left navigation buttons to delete all channels or select NO to cancel deleting. After 

setting is complete, press 

EXIT button to exit the menu.

Note: If the channel to be deleted is locked in the Blocked Programme menu, 

PIN code screen will be displayed when you want to delete this channel from the 

Programme Table menu. Enter the PIN code to delete the channel.

For this feature, please see page. 26-27 

In the event that you do not wish to see certain programs while navigating through 

the channels using the 

P+/P- buttons, then you can use this function. Select the 

program that will be hidden by pressing the 

Up/Down or Right/Left movement 

buttons, scroll to the 

Skip option and press OK button to confirm. SKIP will appear 

on the program to be skipped. You may perform this procedure for more than one 

program. To view the skipped program, directly enter the program number using 

the numeric buttons or select it from the Channel List menu. To cancel the program 

skipping process, select the “

SKIP” option again. After setting is complete, press the 

EXIT button to exit the menu.

You can assign an analog program or programs of choice the names that have a 

maximum of eight characters. To do this, select the analog channel you want to 

rename from the 

Program Table menu with Up/Down movement buttons and 

press the 

RED button on your remote control. The colour of the tab where the 

channel name exist will change and a green box will appear around the initial letter 

of the channel name; choose the desired letter, number or sign using the 

Up/Down 

movement buttons. For the next character, press the 

Right movement button and 

then select the desired letter, number or sign again with the 

Up/Down movement 

buttons. After entering all the characters, store the name you have written in the 

memory by pressing the 

OK button. To write names for any of the other programs, 

simply repeat the above procedure. Press 

MENU button to return to the previous 

menu or press 

EXIT button to exit the menu after the setting is complete.