Beko 19WLP530HID Manual De Usuario

-7-

Helpdesk: 0845 600 4911

If you wish to remove the television stand, please follow these 

steps:
•

Cover a table with a soft towel (or other protection to  

 

prevent damage to the TV or table).

•

Carefully lay the TV front down on the table.

•

Position the TV table stand so that it hangs over the edge

 

of the table.

•  Remove the screws that hold the stand to the TV or unclip stand base.
•  Remove the stand.
•  Attach any new brackets before lifting TV back up.
Note: Keep removed stand and screws safely for future use.

Open the lid of the battery compartment and make sure that you have placed the 

batteries in the correct direction. For this remote control, UM-4, IEC R03 or AAA 1.5V 

batteries are suitable.

Do not throw your old batteries into the fire, discard them in a dedicated waste area 

for this purpose.
Do not mix used batteries with new ones or different types of batteries together.
The performance of the remote control is reduced at a distance of 8 metres from or 

at an angle of 30 degrees beyond the centre of the TV.