Brother LX-910D Manual De Usuario
- 24 -
Corner cutting
After laminating, you can trim each corner of the document.
(1)
Insert a corner of the document into the
corner-cutter slot.
corner-cutter slot.
(2)
The machine will automatically trim the corner
of the document.
of the document.
(3)
Remove the document from the slot.
Note
The maximum thickness of the original document (before lamination) that the corner cutter unit can cut is
0.2mm.
Do not use the corner cutter to trim the magnet back output.
The maximum thickness of the original document (before lamination) that the corner cutter unit can cut is
0.2mm.
Do not use the corner cutter to trim the magnet back output.