Behringer DJ Equipment SX4882 Manual De Usuario

behringer.com

EURODESK SX4882 User Manual

Auxiliary returns
All six stereo pairs, to be located immediately below the aux sends, 

are on unbalanced 1/4" jacks and operate at 0 dBu.

Fig. 7.3: Auxiliary returns

Subgroup inserts
Unbalanced send and return from a single stereo jack socket, wired tip = out, 

ring = in and sleeve = ground/screen.

Fig. 7.4: Subgroup inserts

2-track in/out
RCA sockets for use with tape recorders, etc., signal = main mix, wired center 

post = signal (+ve) and sleeve = ground/screen.

Fig. 7.5: 2-track in/out

2-track/external inputs
Two additional stereo inputs, this time on unbalanced 1/4" jacks,  

wired tip = signal (+ve) and sleeve = ground/screen.

Fig. 7.6: Additional connectors

Main inserts
As above, but for the main mix.

Stereo outputs
The control room output (monitors) main mix, MIX-B and studio output are all on 

a pair of unbalanced 1/4" jacks, nominal output level +4 dBu. The main mix is also 

available as a fully balanced pair.

Phones 1/2
These are on stereo jacks, wired tip = left signal, ring = right signal and 

sleeve = ground/screen (see section 6.4 “Headphones”).

Meter/analyzer out
Unbalanced jacks at +4 dBu for use with external measuring equipment, 

e.g. the built-in real-time analyzer of our BEHRINGER ULTRACURVE PRO DEQ2496 

(signal = master LED meters).

Master balanced outputs
Balanced XLR for connecting to the mastering recorder. Wired pin 1 ground/

screen, pin 2 hot and pin 3 cold. Maximum level is +28 dBu.

Fig. 7.7: Main balanced outputs

Fig. 7.8: A and B-channel input section