Behringer DJ Equipment PMP3000 Manual De Usuario

EUROPOWER PMP1000/PMP3000/PMP5000 User Manual

PMP1000/PMP3000/

PMP5000 (part view)

2 x BEHRINGER EUROLIVE

Stack (B1500 & B1020, both passive)

front panel (part view)

Footswitch

Link output

2 x BEHRINGER B300 (active)

Fig. 5.1: Stereo operation

For stereo operation the POWER AMP switch  

(27) 

 must be set to its upper position 

(MAIN or MAIN L/MAIN R). Outputs A and B provide the stereo main signal for 
passive speakers. The preamp monitor output is connected to two parallel active 
speakers, which are used as on-stage monitors. Use the footswitch to enable/
disable the effects processor.

PMP1000/PMP3000/

PMP5000 Rear panel

EUROPOWER EP1500

EUROPOWER 

B1520

EUROPOWER 

B1500X 

subwoofer

2 x BEHRINGER B300 (active)

Fig. 5.2: Bridged mono operation

This illustration shows the power mixer with a sub-woofer connected to 
OUTPUT B. For a bridged mono operation to OUTPUT B, the AMP MODE selector 
switch 

(27) 

 must be set to its lower position “BRIDGE”. A separate stereo power 

amp (BEHRINGER EUROPOWER EP1500) connected to the preamp main outputs 
delivers the stereo main signal. Two active monitor speakers for on-stage 
operation are connected to the preamp monitor output.