Behringer Europack UB1832FX-Pro Manual De Propietario

EURORACK UB2442FX-PRO/UB2222FX-PRO/UB1832FX-PRO/UB1622FX-PRO User Manual

The BEHRINGER EURORACK mixing console offers you premium-quality 

microphone preamplifiers with optional phantom power supply, balanced line 

inputs and the ability to connect external effects devices. Because of its extensive 

and carefully thought-out routing possibilities, your EURORACK lends itself 

equally to both live and studio use.

IMP Invisible Mic Preamp
The microphone channels are fitted with BEHRINGER’s brand new high-end 

IMP INVISIBLE MIC PREAMPs that boast the following features:

130 dB dynamic range for an incredible amount of headroom

A bandwidth ranging from below 10 Hz to over 200 kHz for crystal-clear 

reproduction of even the finest nuances

The extremely low-noise and distortion-free circuitry guarantees absolutely 

natural and transparent signal reproduction

They are perfectly matched to every conceivable micro phone with up to 

60 dB gain and +48 volt phantom power supply

They enable full utilisation of the greatly extended dynamic range of your 

24-bit/192 kHz HD recorder, thereby main taining optimal audio quality

Additionally, your EURORACK mixing console has an effects 

processor with 24-bit A/D and D/A converters included, which gives 

you 100 presets producing first-class reverb, delay and modulation 

effects plus numerous multi-effects in excellent audio quality.

The mixing consoles of the PRO series feature a state-of-the-art 

integrated switch-mode power supply. One of the great advantages 

is that (compared to conventional circuits) a switch-mode power 

supply adapts to mains voltages between 100 and 240 volts automatically. 

Furthermore, due to its much greater efficiency, it consumes much less energy 

than a conventional power supply unit.

The FBQ Feedback Detection System integrated into the 

graphic EQ of your UB1832FX-PRO is one of this mixer’s most 

outstanding features.

This ingenious circuitry lets you immediately recognize and eliminate feedback 

frequencies. The FBQ Feedback Detection System uses the LEDs in the frequency 

band faders of the graphic EQ to indicate the critical frequencies. This way, 

what once used to be a labor-intensive search for feedback frequencies is now an 

activity that even a child could master.

We have added another useful feature to the 

EURORACK UB1832FX-PRO: the Voice Canceller.
The Voice Canceller is a filter circuitry that filters out vocal 

portions from a track. Therefore, this mixing console is ideally suited for use as 

a karaoke machine. This feature is also an optimal solution for singers who need 

accompanying music for their rehearsals.

A mixing console fulfils three main functions:

Signal processing: 
Preamplification
Microphones convert sound waves into voltage that has to be amplified 

several-fold; then, this voltage is turned into sound that is reproduced 

in a loudspeaker. Because micro phone capsules are very delicate in their 

construction, output voltage is very low and therefore susceptible to 

interference. Therefore, mic signal voltage is amplified directly at the mixer 

input to a higher signal level that is less prone to interference. This higher, 

interference-safe signal level has to be achieved through amplification using 

an amplifier of the highest quality in order to amplify the signal and add as 

little noise to it as possible. The IMP “Invisible” Mic Preamp performs this 

role beautifully, leaving no traces of noise or sound coloration. Interference 

that could take place at the preamplification level could affect signal quality 

and purity, and would then be passed on to all other devices, resulting in 

inaccurate sounding program during recording or playback.
Level-setting
Signals fed into the mixer using a DI-box (Direct Injection) or the output of a 

sound card or a keyboard, often have to be adjusted to the operating level of 

your mixing console.
Frequency response correction
Using the equalizers found in each channel strip, you can simply, quickly and 

effectively adjust the way a signal sounds.
Effects mixing
In addition to the effects processor contained in your mixer, using the 

insert connectors on the mono channels and both aux busses lets you insert 

additional signal processors into your signal path.

Signal distribution: 
Individual signals adjusted at each channel strip are laid out at the aux 

sends and returns, and are either fed into external effects processors or fed 

back to the internal effects processor. Then, the signals are brought back 

into the main mix either via the aux return connectors or via direct internal 

wiring. The mix for the on-stage musicians is also created using the aux 

sends (monitor mix). Similarly, for example, signals for recording equipment, 

power amplifiers, headphones and 2-track outputs can also be taken.

Mix: 
All other mixing console functions fall under this vital category. Creating a mix 

means primarily adjusting the volume levels of individual instruments 

and voices to one another as well as giving them the appropriate weight 

within the overall frequency spectrum. Likewise, you’ll have to sensibly 

spread individual voices across the stereo image of a signal. At the end of 

this process, adjusting the level of the entire mix to other equipment in the 

signal path is required (e. g. recorder/crossover/amplifier).

The control surface of BEHRINGER mixing consoles is optimized in such a way 

that these functions become easy to fulfil while the signal path remains simple 

to follow.