Bay Technical Associates 350 Manual De Usuario

Using the Console Interface

893-00992-B

3-15

 

*. The Trap IP Address and Community String fields can be set using a MIB table (in a Bay Networks proprietary MIB). The 

status of the row in the MIB table can be set to Ignore. If the row status is set to Ignore, the fields appear to be set when 
viewed from the console terminal; however, no traps will be sent to that address until the row status is set to Valid.

The community string used for in-band read-only SNMP operations.

Default Value

public

Range

Any ASCII string of up to 32 printable characters

The community string used for in-band read-write SNMP operations.

Default Value

private

Range

Any ASCII string of up to 32 printable characters

Number one of four trap IP addresses. Successive trap IP address fields are 
numbered 2, 3, and 4. Each trap address has an associated community 
string (see the next field description).

Default Value

0.0.0.0 (no IP address assigned)

Range

Four-octet decimal IP address notation, where each 
octet of the address is represented as a decimal value, 
separated by a decimal point

The community string associated with one of the four trap IP addresses 
(see the Trap #1 IP Address field description).

Default Value

Zero-length string

Range

Any ASCII string of up to 32 printable characters

Determines whether a trap will be sent when there is an SNMP 
authentication failure.

Default Value

Enabled

Range

Enabled, Disabled

350fbk.book  Page 15  Wednesday, July 9, 1997  4:51 PM